Putian Postevio Terminal Module Hardware Networking Tools XQ401II
Punch Down Tool YH8018
Quick Detail:
1. Made of ABS,flame retardant
2. Special tool steel(high speed steel) with solid performance,hard
3. Head for patch panel terminal block
4. Cuts excess wire in one click operation,Ensures proper insertion
of wire
5. Original made in China
6. Used in KJ-245 ,XQ401II
7. In hot sales
Description:
Punch Down Tool for Patch Panel Terminal Block
With pressure sensor and extracting hook to free wires for
soldering, screwing and skinning in preparation for connection and
at the same time cutting off any excess length.
An IDC terminating tool for use on 10 pair Disconnection Strips
237A. It incorporates an extraction hook which assits in the
removal of terminated wires.
64172055-01 KRONE LSA-PLUS RJ outlets.
The networking tools we can offer including sort of insertion
tools, impact and punch down tool (Ericsson punch down tool,
Siemens punch down tool, Corning punch down tool and so on),
crimping tool(RJ45 crimping tools, coaxial cable crimping tool,
picabond ratchet crimper), cable stripper and cutter, cable tester
and connector removal tool, and so on.
In short, we offer the networking tools for cutting and stripping
coaxial cable, twist cable, and optical fiber. And professional
compression crimping tool for different connectors, insertion tools
for different modules .To save cost for customers, we have desired
some tools with multi-function. So you can keep one tool instead of
several different types. Meanwhile, for some coaxial cable crimping
tool you can change the head to fit the cable specification
yourself. It will make you lose weight on tool set but to finish
your work perfectly.
The clamping (crimping) process is to use a special tool at ambient
temperature to exert enough pressure on the wires and crimping
terminals to produce plastic deformation so as to achieve reliable
electrical connections.
Crimp principle is: when the two kinds of metal matrix using
special crimping tools to the wire and put enough pressure when the
pressure terminal, the terminal and the wires are in close contact,
the crimping area temperature and diffusion phenomena, the
formation of alloy layer, between two crimp contact surface to two
pressure parts the part is firmly combined into a whole, forming a
reliable electrical connection.
Crimping and soldering compared has significant advantages:
process, high production efficiency; crimping is cold, no power, no
restriction site; crimping without solder solder and no
environmental pollution; and the mechanical crimping stable
performance, high reliability. But need special crimp crimping
tool, press contacts only once, once crushed, pressed into the
terminal nonsalvable.
Because of the diversity of the MDF and the modules, the clamping
tools are not the same. The clamping knife has the function of
clamping the twisted wires into the reed. When the clamp is
connected, the double stranded wire can complete the insulation
displacement, the connection and the removal of excess thread at
the same time through the bayonet of the reed and the pressure of
the clamping knife. The utility model also has the auxiliary
functions of hook line, suture removal, lead-in reed slot,
positioning and installation module, etc..
Applications:
For wire installation into network and telecommunication
equipment.Indicated type for different module block MDF from kinds
of communication companies,like Krone,Tyco, 3M,Corning, Ericsson,
ZTE, HUAWEI, AMP and so on.Various products make the job more
convenient and special.
