Telecom Drop Wire Subscriber Connector Simply Clamping on Guide
Rail Inside Distribution Box
Quick Detail:
1, Raw Material: High level new PBT or
ABS(UL94V-0),waterproof,fireproof.
2, Contact: Phosphor Bronze
3, Clamping the Guild Rail inside of the distribution box
tightly,to support the drop wire go through stable.
4, For Customer Wire (CW) and Drop Wire(DW) Connection
5, The plug can be with 3point protector(color red) and 5point
protect (color orange),if without protection the color is grey
6. Promptly match up to install this drop wire module into
distribution boxwaterproof,capacity pairs as clients
requirement,normal desire is for 2pairs DP box,4Pair DP box,5Pair
DP box ,10pair DP box,up to 20pair DP box,outdoor waterproof and
indoor fireproof types,IP54.
7. Circuit testing in both network directions.
8, 100% test passed,it can be on your requirement.
Description:
STB Module Subscriber Connector Unit VX-SB
Housing of unit of the connection of distributive wire:Tansparent
Polycarbonate
Fitted Contacts:Tinplated phosphor bronze
Contacts of the connection:Tinplated solid bronze
Sealing material before the lower part:Epoxy resin
Sealing material before the upper cable part:Silicon compound
Cover of the pair of the distributive wire: Polycarbonate
DP box:Un-flammable,fire resistant,Ultra Violet(UV) resistant,high
grade
Sealing material of the insertable module:Gel
Ring Gasket:Elastomer
STB module is another type connection module for Telecom products .
The drop wire module (also we call STB module ,subscriber connector
unit) is desired for the connection of an outdoor to an indoor drop
wire. It allows for circuit testing in both network directions.The
distribution box provides environmental protection to the drop wire
and the connection module. The product is specially recommended for
aggressive environmental conditions,terminations where future
requirements
may include different types of protection.
The protected STB module (drop wire connection module with
protection ) provide a connection point between an exchange-side
cable pair and a distribution pair for telecommunication equipment.
It incorporates a 5-point plug in module (red color) to provide
continuity and a range of other options.Removal of the plug-in
module does not disturb wire connections but makes contacts to them
available for testing of both sides of the telecommunication
network.
The STB module (drop wire connection module with protection ) is
especially recommended for:
1. Outdoor connections where the environment conditions are
extremely atrocious to protect telecommuniactin equipment and
circuitry line.
2. Terminations where user development characteristics require
future flexibility in terms of the type of protection or filtering
capabilities. Offering box with capacity from 1pair to 20pair for
application.
Applications:
The subscriber connector unit is used for the connection of an
outdoor to an indoor drop wire. It allows for circuit testing in
both network directions.The box provides environmental protection.
The product is specially recommended for aggressive environmental
conditions,terminations where future requirements
may include different types of protection.
Specifications :
| Mechanical Performance | Plastic material: ABS&PBT(UL94V-0) |
| Contact material: Phosphor Bronze. |
| Surface Plating Silver(0.5um-5um) |
| Earth bar: Phosphor Bronze.Surface Plating nickel |
| Environment Characteristic | Storage Tempreture: 40 to 70°C |
| Operating Temperature : 10 to 60°C |
| Relative Humidity: 95%, noncondition |
| Electrical Performance | Insulation resistance: 1000 Mohms minimum |
| Contact resistance :5 mohms maximum |
| Dielectric intensity: 1200V DC 60s can't spark over and haven't fly
arc |
