Multi functional Flexible Size From China Network Wiring Tools Factory Accept ODM and OEM YH8014

Cable termination
For the copper cable, the terminal processing can be divided into two forms of mounting RJ45 crystal head and RJ45 module. Terminations are to be correctly machined in accordance with 568A or 568B (this problem will be described in Cable Verification). At present, RJ45 modules of various cable manufacturers can be installed without tools, and some require special tools for wire drawing. When selecting wire tools, they should be multi-purpose and can be used to meet the requirements of module termination of different manufacturers.

BI-3548500 multi-purpose threading knife
(1) Termination of the module
According to the design requirements, determine the wiring mode T568A or T568B, the entire system can only choose one of the wiring.
The outer jacket of the cable should be tight against the end of the module:

Twist the twisted pairs from the center into the corresponding mounting slots (do not separate the lines from the head):

Use a special wire-threading tool to pay attention to the direction of the knife edge.

There is a "high"/"low" pressure setting for the wire cutter. The low setting avoids bending the connecting pins in the module, but it may make the thread too loose.
Finally, mount the well-wired module on the distribution frame or wall outlet.

(2) Termination of RJ45 crystal head
For RJ45 connectors (commonly known as crystal plugs), care should be taken to select the appropriate crimping tool.

RJ45 plugs from different manufacturers have different fixed pressure contact points.

BI-3050600 clamp handle and die, through the replacement of die, to achieve a variety of joints crimping.

BI-3329600 Crimping pliers
Multi-function: Shear, peel, pressure in one, steel body pliers, replaceable crimp module can crimp RJ45/RJ11 crystal head.

Steps (T568B as an example):
Lines are aligned and trimmed by T568B wiring

Insert the paired wire into the crystal head. The wire corresponds to the top of the head. The outer sheath should enter the crystal head.

Put the crystal head into the crimping pliers

Then insert the jumper sheath into the crystal head

High Quality

Sincere Co-operatio 

Superior Service

Ningbo Yuhui Communication Equipment Co.,Ltd  is established in 1995, is one of the leading communication equipment manufacturers in China.

Our firm is located in Cixi city, close to ports of Ningbo and Shanghai.

Up to now , more than 90 employees are working in our company and dozens of advanced technicians  take company as home. 100% products are exported and it’s with 8000 square meters of production zone.

As an ISO9001:2000 certificated company, 20% of staff members pay much energy for research and development ,Under this strict business organization, we are very welcomed with good products and quality,of course ,we have very warm service.

Our products are related to whole cabling telecom communication and internet  system, such as network cabinet, distribution box, keystones modules,patch panel, kinds of modules and accessories. Also the fiber optic patch panel and other splicing items are our hot products.

Through the joint effort of all our staff, our products have been well received by more than 50 foreign countries in America, Europe, Asia and Mid East. And our customers sing high praise for our goods.

Our company will propagate the enterprise spirit of 

High Quality

Sincere Co-operatio

Superior Service

try our best to build the company as a word famous enterprise.

Welcome to contact us, Ningbo Yuhui Communication Equipment CO., LTD will be the reliable partner for you!