Isolation Electromagnetic Good quality cold rolled steel plate
Sever Rack Cabinet YH2012
How to choose the right server cabinet
Choosing the right server cabinet depends not only on the brand of
the product, but also on the quality and function of the product.
If the server used for website construction, virtual hosting, etc.,
is affected by too many problems, it will involve the survival of a
website.
This is an excellent manifestation of the cabinet. The cabinet has
a very distinct hierarchy. The level of the cabinet is not to look
at the brand, but to look at his type, function, performance, and
so on. That is, it is necessary to satisfy the needs of the users
to the greatest extent possible, and to reduce the problems as much
as possible. Although the cabinets look almost the same, there are
still several types of subdivisions depending on their usage. The
common ones are the cabinets used for wiring and the cabinets used
to place servers. Cabinets used for cabling are usually used to
place multiple terminal switches. In addition, the cabinet used to
place the server must have a locked door. Because valuable
equipment inside is to be protected, expensive routers and
firewalls are usually placed inside the cabinet.
After understanding the hierarchy of server storage cabinets, it is
necessary to select what kind of cabinet services are based on
their own needs and the acceptance of quotes. From the above
perspective, we know that the decision to determine the level of
the cabinet is still the main function around the heat. This is
important for the cabinet because it guarantees the normal
operation of the server.
Does that mean that you must choose high-end server racks? This is
not the case, it depends on your requirements for the use of the
server, such as your application needs to generate heat, there is
too much overhead and so on is still the best choice for high-end
server cabinets. Of course, if you are satisfied with the economic
strength, even if the general server cabinet can be satisfied with
the needs, but in order to reduce the worries of the selection of
high-end server racks can also be. Therefore, the most critical
thing is still to contact their own conditions and needs.
(I) Rack frame requirements: (1) Material and load-bearing
requirements:
The cabinet body adopts a 12-fold profile (or 18-fold profile, Xin
Bo has 12-fold and 18-fold two profiles) frame structure, and the
frame is made of high-quality cold-rolled steel plate at one time.
The load-bearing capacity of the cabinet shall not be less than
1500KG (or 1800KG, XinBo 120% of the load of the profile shall be
1500KG, and the load of the 18% of the profile shall be 1800KG). A
third party inspection report shall be provided. Welding robot arm
welding to ensure that no bad welding, leakage welding, in the
normal use of the same type. The top and bottom frames and vertical
profiles are removable for easy transport and field installation.
The
(2) Cabinet front door, rear door, side board requirements
The ventilating rate of the front and rear doors of the cabinet is
not less than 78% (or 85%, Sinbo has two types of mesh doors). The
cabinet doors and side panels are detachable. The front and rear
doors are exposed, and the doors are opened and closed. Flexible
rotation, reliable locking, easy construction, installation and
maintenance; no less than 3 front door hinges, no less than 6 rear
double door hinges, and door opening angle not less than 110°. The
The front door is opened outwards and the door opening direction
can be switched left and right, and the back door is opened
outwards. Before and after the door lock, no less than three
points. The door lock is required to be stable, the switch is
smooth, and the key is universal. The side panel thickness of the
cabinet is 1.5mm, and it can be quickly installed.
